Enhanced PHP File Manager

⬆️ Go Up (..)

📊 Server Information

Server:

Apache

System:

Linux 4.18.0-553.100.1.el8_10.x86_64

PHP Version:

7.2.34

User:

jaindirectory

Directory:

/home/jaindirectory/www/jainsociety/vendor/khanamiryan/qrcode-detector-decoder/lib/qrcode/detector

Free Space:

30.65 GB

🔧 Quick Actions

✏️ Editing: Detector.php

<?php
/*
* Copyright 2007 ZXing authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/

namespace Zxing\Qrcode\Detector;

use Zxing\DecodeHintType;
use Zxing\FormatException;
use Zxing\NotFoundException;
use Zxing\ResultPoint;
use Zxing\ResultPointCallback;
use Zxing\Common\BitMatrix;
use Zxing\Common\DetectorResult;
use Zxing\Common\GridSampler;
use Zxing\Common\PerspectiveTransform;
use Zxing\Common\Detector\MathUtils;
use Zxing\Qrcode\Decoder\Version;

/**
 * Encapsulates logic that can detect a QR Code in an image, even if the QR Code
 * is rotated or skewed, or partially obscured.
 *
 * @author Sean Owen
 */
?>
<?php
class Detector {

private $image;
    private $resultPointCallback;

public function __construct($image) {
        $this->image = $image;
    }

protected final function getImage() {
        return $this->image;
    }

protected final function  getResultPointCallback() {
        return $this->resultPointCallback;
    }

/**
 * Detects a QR Code in an image.
 *
 * @return {@link DetectorResult} encapsulating results of detecting a QR Code
 * @throws NotFoundException if QR Code cannot be found
 * @throws FormatException if a QR Code cannot be decoded
 */

/**
 * Detects a QR Code in an image.
 *
 * @param hints optional hints to detector
 * @return {@link DetectorResult} encapsulating results of detecting a QR Code
 * @throws NotFoundException if QR Code cannot be found
 * @throws FormatException if a QR Code cannot be decoded
 */
 public final function detect($hints=null){/*Map<DecodeHintType,?>*/

$resultPointCallback = $hints == null ? null :
            $hints->get('NEED_RESULT_POINT_CALLBACK');
        /* resultPointCallback = hints == null ? null :
                (ResultPointCallback) hints.get(DecodeHintType.NEED_RESULT_POINT_CALLBACK);*/
        $finder = new FinderPatternFinder($this->image, $resultPointCallback);
        $info = $finder->find($hints);

return $this->processFinderPatternInfo($info);
    }

protected final function processFinderPatternInfo($info){

$topLeft = $info->getTopLeft();
        $topRight = $info->getTopRight();
        $bottomLeft = $info->getBottomLeft();

$moduleSize = (float) $this->calculateModuleSize($topLeft, $topRight, $bottomLeft);
 if ($moduleSize < 1.0) {
 throw NotFoundException::getNotFoundInstance();
 }
 $dimension =(int) $this->computeDimension($topLeft, $topRight, $bottomLeft, $moduleSize);
 $provisionalVersion = Version::getProvisionalVersionForDimension($dimension);
 $modulesBetweenFPCenters = $provisionalVersion->getDimensionForVersion() - 7;

$alignmentPattern = null;
// Anything above version 1 has an alignment pattern
        if (count($provisionalVersion->getAlignmentPatternCenters())> 0) {

// Guess where a "bottom right" finder pattern would have been
            $bottomRightX = $topRight->getX() - $topLeft->getX() + $bottomLeft->getX();
            $bottomRightY = $topRight->getY() - $topLeft->getY() + $bottomLeft->getY();

// Estimate that alignment pattern is closer by 3 modules
// from "bottom right" to known top left location
            $correctionToTopLeft = 1.0 - 3.0 / (float) $modulesBetweenFPCenters;
            $estAlignmentX = (int) ($topLeft->getX() + $correctionToTopLeft * ($bottomRightX - $topLeft->getX()));
            $estAlignmentY = (int) ($topLeft->getY() + $correctionToTopLeft * ($bottomRightY - $topLeft->getY()));

// Kind of arbitrary -- expand search radius before giving up
 for ($i = 4; $i <= 16; $i <<= 1) {//??????????
 try {
 $alignmentPattern = $this->findAlignmentInRegion($moduleSize,
 $estAlignmentX,
 $estAlignmentY,
 (float) $i);
 break;
 } catch (NotFoundException $re) {
// try next round
 }
 }
// If we didn't find alignment pattern... well try anyway without it
 }

$transform =
            $this->createTransform($topLeft, $topRight, $bottomLeft, $alignmentPattern, $dimension);

$bits = $this->sampleGrid($this->image, $transform, $dimension);

$points = array();
        if ($alignmentPattern == null) {
            $points = array($bottomLeft, $topLeft, $topRight);
        } else {
           // die('$points = new ResultPoint[]{bottomLeft, topLeft, topRight, alignmentPattern};');
$points =  array($bottomLeft, $topLeft, $topRight, $alignmentPattern);
        }
        return new DetectorResult($bits, $points);
    }

private static function createTransform($topLeft,
                                            $topRight,
                                            $bottomLeft,
                                            $alignmentPattern,
                                            $dimension) {
        $dimMinusThree = (float) $dimension - 3.5;
        $bottomRightX = 0.0;
        $bottomRightY = 0.0;
        $sourceBottomRightX = 0.0;
        $sourceBottomRightY = 0.0;
        if ($alignmentPattern != null) {
            $bottomRightX = $alignmentPattern->getX();
            $bottomRightY = $alignmentPattern->getY();
            $sourceBottomRightX = $dimMinusThree - 3.0;
            $sourceBottomRightY = $sourceBottomRightX;
        } else {
// Don't have an alignment pattern, just make up the bottom-right point
            $bottomRightX = ($topRight->getX() - $topLeft->getX()) + $bottomLeft->getX();
            $bottomRightY = ($topRight->getY() - $topLeft->getY()) + $bottomLeft->getY();
            $sourceBottomRightX = $dimMinusThree;
            $sourceBottomRightY = $dimMinusThree;
        }

return PerspectiveTransform::quadrilateralToQuadrilateral(
            3.5,
            3.5,
            $dimMinusThree,
            3.5,
            $sourceBottomRightX,
            $sourceBottomRightY,
            3.5,
            $dimMinusThree,
            $topLeft->getX(),
            $topLeft->getY(),
            $topRight->getX(),
            $topRight->getY(),
            $bottomRightX,
            $bottomRightY,
            $bottomLeft->getX(),
            $bottomLeft->getY());
    }

private static function sampleGrid($image, $transform,
                                       $dimension) {

$sampler = GridSampler::getInstance();
        return $sampler->sampleGrid_($image, $dimension, $dimension, $transform);
    }

/**
 * Computes the dimension (number of modules on a size) of the QR Code based on the position
 * of the finder patterns and estimated module size.
 */
 private static function computeDimension($topLeft,
 $topRight,
 $bottomLeft,
 $moduleSize) {
 $tltrCentersDimension = MathUtils::round(ResultPoint::distance($topLeft, $topRight) / $moduleSize);
 $tlblCentersDimension = MathUtils::round(ResultPoint::distance($topLeft, $bottomLeft) / $moduleSize);
 $dimension = (($tltrCentersDimension + $tlblCentersDimension) / 2) + 7;
 switch ($dimension & 0x03) { // mod 4
 case 0:
 $dimension++;
 break;
// 1? do nothing
 case 2:
 $dimension--;
 break;
 case 3:
 throw NotFoundException::getNotFoundInstance();
 }
 return $dimension;
 }

/**
 * Computes an average estimated module size based on estimated derived from the positions
 * of the three finder patterns.
 *
 * @param topLeft detected top-left finder pattern center
 * @param topRight detected top-right finder pattern center
 * @param bottomLeft detected bottom-left finder pattern center
 * @return estimated module size
 */
 protected final function calculateModuleSize($topLeft,
 $topRight,
 $bottomLeft) {
// Take the average
 return ($this->calculateModuleSizeOneWay($topLeft, $topRight) +
 $this->calculateModuleSizeOneWay($topLeft, $bottomLeft)) / 2.0;
 }

/**
 * Estimates module size based on two finder patterns -- it uses
 * {@link #sizeOfBlackWhiteBlackRunBothWays(int, int, int, int)} to figure the
 * width of each, measuring along the axis between their centers.
 */
 private function calculateModuleSizeOneWay($pattern, $otherPattern) {
 $moduleSizeEst1 = $this->sizeOfBlackWhiteBlackRunBothWays($pattern->getX(),
 (int) $pattern->getY(),
 (int) $otherPattern->getX(),
 (int) $otherPattern->getY());
 $moduleSizeEst2 = $this->sizeOfBlackWhiteBlackRunBothWays((int) $otherPattern->getX(),
 (int) $otherPattern->getY(),
 (int) $pattern->getX(),
 (int) $pattern->getY());
 if (is_nan($moduleSizeEst1)) {
 return $moduleSizeEst2 / 7.0;
 }
 if (is_nan($moduleSizeEst2)) {
 return $moduleSizeEst1 / 7.0;
 }
// Average them, and divide by 7 since we've counted the width of 3 black modules,
// and 1 white and 1 black module on either side. Ergo, divide sum by 14.
 return ($moduleSizeEst1 + $moduleSizeEst2) / 14.0;
 }

/**
 * See {@link #sizeOfBlackWhiteBlackRun(int, int, int, int)}; computes the total width of
 * a finder pattern by looking for a black-white-black run from the center in the direction
 * of another po$(another finder pattern center), and in the opposite direction too.
 */
 private function sizeOfBlackWhiteBlackRunBothWays($fromX, $fromY, $toX, $toY) {

$result = $this->sizeOfBlackWhiteBlackRun($fromX, $fromY, $toX, $toY);

// Now count other way -- don't run off image though of course
 $scale = 1.0;
 $otherToX = $fromX - ($toX - $fromX);
 if ($otherToX < 0) {
 $scale = (float) $fromX / (float) ($fromX - $otherToX);
 $otherToX = 0;
 } else if ($otherToX >= $this->image->getWidth()) {
 $scale = (float) ($this->image->getWidth() - 1 - $fromX) / (float) ($otherToX - $fromX);
 $otherToX = $this->image->getWidth() - 1;
 }
 $otherToY = (int) ($fromY - ($toY - $fromY) * $scale);

$scale = 1.0;
 if ($otherToY < 0) {
 $scale = (float) $fromY / (float) ($fromY - $otherToY);
 $otherToY = 0;
 } else if ($otherToY >= $this->image->getHeight()) {
 $scale = (float) ($this->image->getHeight() - 1 - $fromY) / (float) ($otherToY - $fromY);
 $otherToY = $this->image->getHeight() - 1;
 }
 $otherToX = (int) ($fromX + ($otherToX - $fromX) * $scale);

$result += $this->sizeOfBlackWhiteBlackRun($fromX, $fromY, $otherToX, $otherToY);

// Middle pixel is double-counted this way; subtract 1
        return $result - 1.0;
    }

/**
 * This method traces a line from a po$in the image, in the direction towards another point.
 * It begins in a black region, and keeps going until it finds white, then black, then white again.
 * It reports the distance from the start to this point.
 *
 * This is used when figuring out how wide a finder pattern is, when the finder pattern
 * may be skewed or rotated.
 */
 private function sizeOfBlackWhiteBlackRun($fromX, $fromY, $toX, $toY) {
// Mild variant of Bresenham's algorithm;
// see http://en.wikipedia.org/wiki/Bresenham's_line_algorithm
 $steep = abs($toY - $fromY) > abs($toX - $fromX);
 if ($steep) {
 $temp = $fromX;
 $fromX = $fromY;
 $fromY = $temp;
 $temp = $toX;
 $toX = $toY;
 $toY = $temp;
 }

$dx = abs($toX - $fromX);
 $dy = abs($toY - $fromY);
 $error = -$dx / 2;
 $xstep = $fromX < $toX ? 1 : -1;
 $ystep = $fromY < $toY ? 1 : -1;

// In black pixels, looking for white, first or second time.
        $state = 0;
// Loop up until x == toX, but not beyond
        $xLimit = $toX + $xstep;
        for ($x = $fromX, $y = $fromY; $x != $xLimit; $x += $xstep) {
            $realX = $steep ? $y : $x;
            $realY = $steep ? $x : $y;

// Does current pixel mean we have moved white to black or vice versa?
// Scanning black in state 0,2 and white in state 1, so if we find the wrong
// color, advance to next state or end if we are in state 2 already
            if (($state == 1) == $this->image->get($realX, $realY)) {
                if ($state == 2) {
                    return MathUtils::distance($x, $y, $fromX, $fromY);
                }
                $state++;
            }

$error += $dy;
            if ($error > 0) {
                if ($y == $toY) {
                    break;
                }
                $y += $ystep;
                $error -= $dx;
            }
        }
// Found black-white-black; give the benefit of the doubt that the next pixel outside the image
// is "white" so this last po$at (toX+xStep,toY) is the right ending. This is really a
// small approximation; (toX+xStep,toY+yStep) might be really correct. Ignore this.
        if ($state == 2) {
            return MathUtils::distance($toX + $xstep, $toY, $fromX, $fromY);
        }
// else we didn't find even black-white-black; no estimate is really possible
        return NAN;
    }

/**
 * Attempts to locate an alignment pattern in a limited region of the image, which is
 * guessed to contain it. This method uses {@link AlignmentPattern}.
 *
 * @param overallEstModuleSize estimated module size so far
 * @param estAlignmentX x coordinate of center of area probably containing alignment pattern
 * @param estAlignmentY y coordinate of above
 * @param allowanceFactor number of pixels in all directions to search from the center
 * @return {@link AlignmentPattern} if found, or null otherwise
 * @throws NotFoundException if an unexpected error occurs during detection
 */
 protected final function findAlignmentInRegion($overallEstModuleSize,
 $estAlignmentX,
 $estAlignmentY,
 $allowanceFactor)
 {
// Look for an alignment pattern (3 modules in size) around where it
// should be
 $allowance = (int) ($allowanceFactor * $overallEstModuleSize);
 $alignmentAreaLeftX = max(0, $estAlignmentX - $allowance);
 $alignmentAreaRightX = min($this->image->getWidth() - 1, $estAlignmentX + $allowance);
 if ($alignmentAreaRightX - $alignmentAreaLeftX < $overallEstModuleSize * 3) {
 throw NotFoundException::getNotFoundInstance();
 }

$alignmentAreaTopY = max(0, $estAlignmentY - $allowance);
 $alignmentAreaBottomY = min($this->image->getHeight() - 1, $estAlignmentY + $allowance);
 if ($alignmentAreaBottomY - $alignmentAreaTopY < $overallEstModuleSize * 3) {
 throw NotFoundException::getNotFoundInstance();
 }

$alignmentFinder =
            new AlignmentPatternFinder(
                $this->image,
                $alignmentAreaLeftX,
                $alignmentAreaTopY,
                $alignmentAreaRightX - $alignmentAreaLeftX,
                $alignmentAreaBottomY - $alignmentAreaTopY,
                $overallEstModuleSize,
                $this->resultPointCallback);
        return $alignmentFinder->find();
    }

}

❌ Cancel

🗂️ Enhanced PHP File Manager

📊 Server Information

🔧 Quick Actions

✏️ Editing: Detector.php

📤 Upload File

📁 Create Folder

📄 Create File

✏️ Rename Item

🗑️ Delete Confirmation